Summary
This is a duel mosfet mount for a am8 frame. Do to the the size of cheap eBay mosfet you might have to drill the holes out very little. This will work with any 2040 Frame printer.
Tag: AM8
-
AM8 Duel Mosfets Mount (Or other 2040 Extrusion Frame 3D printers) 3D Print Model
-
AM8 Electronics Case with 120mm Fan Cover 3D Print Model
Summary
I loved this design by feenix82, especially the internal cable management, but wanted it to fit the AM8 Misumi Extrusion Frame. I only adjusted the tabs here to fit the frame. After printing I realized I made the tabs a little too thin and the screw would bottom out, therefore you may need to add a washer under the screw head to prevent that. The cover with 120mm fan is awesome but for some reason my printer had issues printing the honeycomb pattern horizontally so I got rid of them. This may actually improve airflow as it’ll pull more air from the sides of the case and out the front. Who knows. Either way, I like that the motherboard and mosfet is enclosed and this should provide some much needed cable management.
Print Settings
Rafts:
No
Supports:
Doesn’t Matter
Resolution:
.2mm
Infill:
15%
Notes:
I printed with supports but many say you don’t need it. In my case it may have caused more issues as in trying to remove supports I broke some of the cable management loops inside and had to glue them. You’ll have to try it and see how it works with your printer. -
AM8 Z Axis Single Bearing 3D Print Model
Summary
I’ve broke a few of these trying to slide it onto the 2020 v-slot extrusion. The back of it also rubs against the 2040 vertical extrusions. I removed some of the material from the inside to allow it to slide onto the 2020 easier and removed some from the back so it didn’t rub on the 2040 vertical extrusions.
Mirror the part for the opposite side.
Print Settings
Printer:
AM8 Rafts:
No Supports:
No Resolution:
.2 Infill:
80% -
AX8 Anet a8 frame ( AM8 remix ) 3D Print Model
Summary
Just a 3030 anet a8 🙂 , is a AM8 remix so all credit go:
To pheneeny for https://www.thingiverse.com/thing:2263216 ( many parts )
To EclipseDS for https://www.thingiverse.com/thing:2374402 ( Z rod )
to Leo_N for https://www.thingiverse.com/thing:2360242/#files ( fan and sensor )
to jbrandonferg for https://www.thingiverse.com/thing:2127743/#files ( x belt tentions)
to GaryK47 for https://www.thingiverse.com/thing:2367376/#files ( cable holder )
to runtimejack for https://www.thingiverse.com/thing:2380794 ( psu mount )
LCD mount u get here https://www.thingiverse.com/thing:2005640
like i said before , i remixed somes parts and adapted them to 3030 , works perfekt , i just use screws from local store , m6 10 and m6 nuts , printed brackets and works like a dream, i used to put a screwdeiver on the side of the nut when i screw it , i dindt buy any special screw/nuts , i am not pro on this so please if u can make some upgrades just do it <3
Thx
Mr Jean
Print Settings
Rafts:
Doesn’t Matter Supports:
Doesn’t Matter -
Customizable Plate Bracket for Aluminium Extrusion Profiles (Misumi 2020, 2040, 4040, …) 3D Print Model
This is a customizable 3d model that allows you to create and print aluminum extrusion brackets for different types and sizes of extrusion profiles.
-
AM8 Tablet Holder 3D Print Model
Summary
This is a tablet holder for the AM8. With Octoprint, you can replace your printer’s screen with a dedicated cheap/old tablet. This was designed with the Kindle Fire in mind, but it should work with many different tablets.
Print Settings
Printer:
Anet AM8 Rafts:
No Supports:
No -
AM8 Lowered Y Tensioner Block 3D Print Model
Summary
This is a Y Tensioner block mod that lowers the tensioner by about 5MM. This was created in response to some people having belt aligment issues because there belt holder considerably lowers the belt position. This also strengthens the Y tensioner so that it can easily be printed horizontal without supports.
Note, I have not tested this. I do not need it for my printer. This is for people that do need it. Let me know if it needs to be changed. -
AM8 2020 2040 Filament Guide 3D Print Model
Summary
Just a filament guide if your using my spool holder remix.
