Tag: allterrain

  • Buick Monster truck 3D Model

    Buick Monster truck 3D Model

    Model dimensions:- length – 5014 mm- width – 3310 mm- height – 3160 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Wheel of Trophy truck 3D Model

    Wheel of Trophy truck 3D Model

    Model dimensions:- diameter – 980 mm- width – 338 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Pontiac Monster truck 3D Model

    Pontiac Monster truck 3D Model

    Model dimensions:- length – 5030 mm- width – 3310 mm- height – 3054 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 24 3D Model

    Offroad wheel 24 3D Model

    Model dimensions:- diameter – 400 mm- width – 105 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • ARGO J6 Atlas XTR 3D Model

    ARGO J6 Atlas XTR 3D Model

    ARGO is a Canadian manufacturer of amphibious all-terrain vehicles. It was founded in 1962 as Ontario Drive and Gear Limited, in Kitchener, Ontario and was later moved to New Hamburg, Ontario. ARGO offers 6×6 and 8×8 amphibious vehicles.Model dimensions:- length – 2330 mm- width – 1650 mm- height – 2070 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://www.argo-xtr.com/index.php/xtr-robots/j8-atlas-xtr/http://www.unmannedsystemstechnology.com/2017/05/argo-unveils-amphibious-robot-defense-disaster-recovery/argo-j8-atlas-xtr/https://www.youtube.com/watch?v=i_bLL-lsT4o

  • ARGO J8 Atlas XTR 3D Model

    ARGO J8 Atlas XTR 3D Model

    ARGO is a Canadian manufacturer of amphibious all-terrain vehicles. It was founded in 1962 as Ontario Drive and Gear Limited, in Kitchener, Ontario and was later moved to New Hamburg, Ontario. ARGO offers 6×6 and 8×8 amphibious vehicles.Model dimensions:- length – 3000 mm- width – 1650 mm- height – 2070 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://www.argo-xtr.com/index.php/xtr-robots/j8-atlas-xtr/http://www.unmannedsystemstechnology.com/2017/05/argo-unveils-amphibious-robot-defense-disaster-recovery/argo-j8-atlas-xtr/https://www.youtube.com/watch?v=i_bLL-lsT4o

  • Argo platform 8×8 with 4 tracks 3D Model

    Argo platform 8×8 with 4 tracks 3D Model

    ARGO is a Canadian manufacturer of amphibious all-terrain vehicles. It was founded in 1962 as Ontario Drive and Gear Limited, in Kitchener, Ontario and was later moved to New Hamburg, Ontario. ARGO offers 6×6 and 8×8 amphibious vehicles.Model dimensions:- length – 2890 mm- width – 1620 mm- height – 785 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://www.argoxtv.com/https://www.youtube.com/watch?v=PpCnCuQYE1whttps://www.youtube.com/watch?v=7YD7sAQI0tIhttps://en.wikipedia.org/wiki/ARGO_(ATV_manufacturer)http://www.argovehicles.com/product9.php

  • Chassis with Terrastar wheel system 3D Model

    Chassis with Terrastar wheel system 3D Model

    Model dimensions:- length – 8848,3 mm- width – 3480 mm- height – 2051,2 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 23 3D Model

    Offroad wheel 23 3D Model

    Model dimensions:- diameter – 1050 mm- width – 555 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Chassis for Bigfoot 5 3D Model

    Chassis for Bigfoot 5 3D Model

    Model dimensions:- length – 6588 mm- width – 4114 mm- height – 3224 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Chassis 6×6 for Mud truck 3D Model

    Chassis 6×6 for Mud truck 3D Model

    Model dimensions:- length – 7304 mm- width – 2920 mm- height – 2002 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Chassis 8×8 for truck 3D Model

    Chassis 8×8 for truck 3D Model

    Model dimensions:- length – 8660 mm- width – 2500 mm- height – 1380 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Sport Car White 3D Model

    Sport Car White 3D Model

    -No any third party plug-in used-No extra elements included with model-Lights and cameras are not included with model-HDRI map doesn’t included with modelMax Corona scene includes:-6 Object(s)-2 PNG textures.All textures are PBR.Max Vray scene includes:-6 Object(s)-2 PNG textures.All textures are PBR.All objects are real-world scale.All scenes in “cm”.All priview images are rendered with Corona Render.

  • Porsche Cayenne Turbo 2011 3D Model

    Porsche Cayenne Turbo 2011SUVFeatures:- Model ready for animation;- Photorealistic model;- High-poly model;- Detailed interior and exterior;- Wheels rotate;- No special plugin needed to open model.

  • 2018 GMC Sierra 2500HD All Terrain X 3D Model

    2018 GMC Sierra 2500HD All Terrain X 3D Model

    2018 GMC Sierra 2500HD All Terrain XCreated in 3dsmax 2015 and Vray 3.20.03.Polycount with Turbosmooth off: 364000Polycount with Turbosmooth on (iterations set to 1): 1914000Modeled in real world scale and metric unit.All objects, materials and textures are properly named.Objects organized in layers and groups.Lighting setup is not included in the package.

  • BMW Valkyrie 788 3D Model

    BMW Valkyrie 788 3D Model

    Model dimensions:- length – 5345 mm- width – 3000 mm- height – 2280 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://www.drive2.ru/r/bmw/1606254/https://www.youtube.com/watch?v=lIFKRODrMeAhttps://www.youtube.com/watch?v=SdMXoJZBKuQ

  • Chassis of Hill and Hole truck 3D Model

    Chassis of Hill and Hole truck 3D Model

    Model dimensions:- length – 4264 mm- width – 2385 mm- height – 1939 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Ripsaw EV-1 from movie GI JOE 2 3D Model

    Ripsaw EV-1 from movie GI JOE 2 3D Model

    The Ripsaw is a light tank designed and built by Howe & Howe Technologies.The Howe brothers started the Ripsaw as a small family project in 2000. They introduced it at a Dallas vehicle show in 2001, where it caught the interest of the U.S. Army.Model dimensions:- length – 5170 mm- width – 2375 mm- height – 2190 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://www.youtube.com/watch?v=-Qsqggvlfqghttp://www.howeandhowe.com/gi-joe-retaliation-ripsaw.htmlhttp://www.lukefreeborn.com/new-gallery-5/3cg80oprvtaycstsdkxe3zfv15g0z6http://news.hisstank.com/2011/12/17/howe-and-howe-technologies-ripsaw-ev-1-combat-vehicle-featured-in-g-i-joe-retaliation-10950

  • Chassis 4×4 3D Model

    Chassis 4×4 3D Model

    Model dimensions:- length – 4850 mm- width – 2370,5 mm- height – 1220 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 22 3D Model

    Offroad wheel 22 3D Model

    Model dimensions:- diameter – 940 mm- width – 440 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Monster Bus 3D Model

    Monster Bus 3D Model

    Model dimensions:- length – 9380 mm- width – 3540 mm- height – 3900 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 21 3D Model

    Offroad wheel 21 3D Model

    Model dimensions:- diameter – 960 mm- width – 497,5 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Dirt dragster 3D Model

    Dirt dragster 3D Model

    Model dimensions:- length – 4396 mm- width – 2417 mm- height – 2539 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 20 3D Model

    Offroad wheel 20 3D Model

    Model dimensions:- diameter – 1564 mm- width – 300 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 19 3D Model

    Offroad wheel 19 3D Model

    Model dimensions:- diameter – 940 mm- width – 400 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Chassis for SHERP 3D Model

    Chassis for SHERP 3D Model

    Model dimensions:- length – 3400 mm- width – 2600 mm- height – 1690 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Toyota Hilux Regular Cab 3D Model

    Toyota Hilux Regular Cab 3D Model

    Toyota Hilux Regular Cab 2016 2015 2017 2018 2019 2020 pickup offroad suv japan usa popular 4×4 allterrain car single base

  • Offroad wheel 18 3D Model

    Offroad wheel 18 3D Model

    Model dimensions:- diameter – 630 mm- width – 295 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 17 3D Model

    Offroad wheel 17 3D Model

    Model dimensions:- diameter – 630 mm- width – 295 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 16 3D Model

    Offroad wheel 16 3D Model

    Model dimensions:- diameter – 1140 mm- width – 800 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 15 3D Model

    Offroad wheel 15 3D Model

    Model dimensions:- diameter – 1180n mm- width – 470 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Concept tracked vehicle 3D Model

    Concept tracked vehicle 3D Model

    Model dimensions:- length – 5071 mm- width – 2610 mm- height – 1820,9 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • SHERP 3D Model

    SHERP 3D Model

    Model dimensions:- length – 3400 mm- width – 2600 mm- height – 2520 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://sherpatv.com/https://www.youtube.com/watch?v=FpkC0URou68https://www.youtube.com/watch?v=WrjjV6nGh0ghttps://www.youtube.com/watch?v=Yxr5pBEI7mMhttp://sherpatv.com/en/production-sherp-pro/

  • Wheel of SHERP 3D Model

    Wheel of SHERP 3D Model

    Model dimensions:- diameter – 1600 mm- width – 610 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Tracked Hot rod 3D Model

    Tracked Hot rod 3D Model

    Model dimensions:- length – 5120 mm- width – 2730 mm- height – 1980 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • 2012 Jeep Wrangler Rubicon 3D Model

    2012 Jeep Wrangler Rubicon 3D Model

    Jeep Wrangler 2012 low-poly 3d model ready for Virtual Reality (VR), Augmented Reality (AR), games and other real-time apps.- car textures:PNG – 4K resolution- other available formats: obj, 3ds, fbx, max.- Polycount: 35 668 poly / 38 378 tris

  • Offroad truck wheel 2 3D Model

    Offroad truck wheel 2 3D Model

    Model dimensions:- diameter – 1280 mm- width – 460 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • BMW X6M 3D Model

    BMW X6M 3D Model

    BMW X6MSport carFeatures:- Wheels are grouped and ready to animation;- Color of a body can be changed;- Low-poly model;- Photorealistic 3D model.

  • Offroad wheel 14 3D Model

    Offroad wheel 14 3D Model

    Model dimensions:- diameter – 1000 mm- width – 600 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Super bogger 3D Model

    Super bogger 3D Model

    Model dimensions:- length – 10560,6 mm- width – 3050 mm- height – 4008 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 2 Free 3D Model

    Offroad wheel 2 Free 3D Model

    You can use them for your 3d models.Rendered in Keyshot 5.0.99.

  • Monster truck wheel Free 3D Model

    Monster truck wheel Free 3D Model

    Diameter – 1.7mWidth – 1.1mDesigned in SolidWorks 2012, rendered in KeyShot 5.0.99.

  • Morrow project Overland train Mark II 3D Model

    Morrow project Overland train Mark II 3D Model

    In the 1950s the LeTourneau company developed several overland trains, essentially oversized semi-trailer trucks that could travel over almost any terrain. Their intention was to be able to handle logistics needs without being dependent on local road or rail systems, allowing them to operate in back-country areas. The US Army had three experimental units built, the largest reaching almost 600 feet (183 m) long, which holds the record for the longest offroad vehicle. Road trains are in use in certain roles today, but the US Army examples and a few derivatives appear to be the only offroad examples built.LCC-1 was so successful that in 1958 the Army contracted for a larger version, the TC-497 Overland Train Mark II. Generally similar to the LCC-1 in concept, the Mark II included a number of features to allow the train to grow to any length.The Mark II had a much larger six-wheeled cab that was over 30 feet (9.1 m) tall and was no longer articulated due to the ability for all the wheels to be steered. The turbine engine was much smaller than the diesel it replaced, allowing the interior to support a crew of six with sleeping quarters, toilets and a galley. It was even equipped with a radar. An additional two power cars and ten cargo cars were built for testing. In total the train now stretched over 570 feet (170 m). On flat ground it could carry 150 tons of cargo at about 20 mph. Range at full load was normally 350 to 400 miles (560 to 640 km), but additional fuel trailers could be added to extend it.[8]Final specifications were completed in 1960, and construction took most of 1961. After preliminary testing, it was handed to the Army in February 1962, and shipped to the Yuma Proving Ground in Yuma, Arizona. In testing under the “Project OTTER”, for “Overland Train Terrain Evaluation Research”, the vehicle performed well. But in the end the Army gave up on the idea as newer heavy-lift helicopters like the S-64 Skycrane made the train concept outdated.The vehicle remained unused for a time, and was then put up for sale for $1.4 million in 1969. All that remains of the Mark II is the control cab which remains at Yuma, the rest was sold off to a local scrap dealer. The Mark II retains the record for the longest offroad vehicle in the world.Control car model dimensions:- length – 17469 mm- width – 5850 mm- height – 7568 mmEnclosed payload car model dimensions:- length – 16500 mm- width – 5850 mm- height – 3500 mmRepair module model dimensions:- length – 16500 mm- width – 5850 mm- height – 4700 mmOverall model dimensions:- length – 89115 mm- width – 5850 mm- height – 7568 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://asmrb.pbworks.com/w/page/53070717/Morrow%20Project%20Overland%20Trainhttps://en.wikipedia.org/wiki/Overland_trainhttp://shusharmor.livejournal.com/782432.html?thread=9462112

  • Porsche Macan Turbo 3D Model

    Porsche Macan Turbo 3D Model

    High quality Porsche Macan Turbo 3D model made in Cinema4D R15, and rendered in KeyShot 5.0 fully textured with properly assigned and named materials.-detailed high quality exterior mesh-included in 3ds,c4d,fbx,obj formats, or any other if you want-textures included, simple materials-every object have only 1 material so you won’t have problems in rendering programs, such as Keyshot-objects count: 107, materials count: 25-polycount: 350000, mostly quads-textures sizes: 1024,2048+pxPlease note that I suggest using .c4d or .obj files for BEST experience! Other formats are just exported. Detailed exterior only, basic interior.Resources: Google Images, many wraps, shots, and blueprints.Cheapest model available. Thank you for buying.

  • Ripsaw EV3-F4 3D Model

    Ripsaw EV3-F4 3D Model

    The Ripsaw is a developmental unmanned light tank designed and built by Howe & Howe Technologies for evaluation by the United States Army.The Ripsaw is intended to perform various missions including convoy protection, perimeter defense, surveillance, rescue, border patrol, crowd control, and explosive ordnance disposal.Model dimensions:- length – 4734,4 mm- width – 2330 mm- height – 1656 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://www.ripsawtank.com/ripsaw-ev3-f4.htmlhttp://www.ripsawtank.com/https://www.youtube.com/watch?v=H4ibhUBW-Lc

  • Wheel for rock crawling buggy Free 3D Model

    Wheel for rock crawling buggy Free 3D Model

    Model dimensions:- diameter – 900 mm- width – 310 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99

  • Rover Free 3D Model

    Rover Free 3D Model

    Chassis represented by four tracks, which are driven by electric motors. Leverage helps to overcome considerable difficulties relief.Designed in SolidWorks 2012, rendered in KeyShot 5.0.99.

  • Mud truck 3 3D Model

    Mud truck 3 3D Model

    Model dimensions:- length – 4892 mm- width – 3840 mm- height – 3599 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel Free 3D Model

    Offroad wheel Free 3D Model

    You can use them for your 3d models.Rendered in Keyshot 5.0.99.

  • Pickup with Mattracks Suspension tracks 3D Model

    Pickup with Mattracks Suspension tracks 3D Model

    Model dimensions:- length – 4455,5 mm- width – 2612 mm- height – 2263,7 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Rover 3 3D Model

    Rover 3 3D Model

    Model dimensions:- length – 4644,8 mm- width – 5180 mm- height – 2420,14 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 640 mm- width – 106 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 1700 mm- width – 1100 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 785 mm- width – 280 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 1000 mm- width – 370 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 1100 mm- width – 450 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 939,8 mm- width – 350 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Diecast model of Mongo Heist Truck from Fast and Furious 3D Model

    Diecast model of Mongo Heist Truck from Fast and Furious 3D Model

    The truck known as “Mongo” from Fast Five, was built from scratch using an old Oshkosh HEMTT military cab the film crew was able to pickup at a Marine Corps surplus sale. The cab sits on a collection of steel tubing, which serves as its fundamental support and chassis. A cradle was built into the underside of the vehicle, from which all its suspension anchors to, including a set of box shocks.Diecast model are in 1:18 scale.Details need to be from plastic, metal and rudder.Model dimensions:- length – 439,75 mm- width – 146,11 mm- height – 154 mmThe list of speciesof details:Air balloonsBrakeCockpit frame grid 1Cockpit frame grid 2Cardan shaft part 1Cardan shaft part 2Cardan shaft part 3Cockpit frameDashboardDiecast model of Mongo Heist Truck 1 to 18EngineEngine gridFrameFront damperFront damper part 1Front damper part 2Front damper springFront drive axleHandleHeadlampHubHydraulic cylinder part 1Hydraulic cylinder part 2Left exhaust tubeLeft wheelLimiterLower rodMain frameMirrorNOS balloonPin 2x6Pin 2x8Pin 2×10,5П PlatformRadiatorRear damperRear damper part 1Rear damper part 2Rear drive axleRear part of platformRight exhaust tubeRight wheelRimRubber protection 1Rubber protection 2Rubber protection 3SeatSide hydraulic cylinder part 1Side hydraulic cylinder part 2Side rampSide ramp gridStearing rodStering wheelTireUpper rodWheel axleWinchDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Information links:http://www.edmunds.com/car-reviews/features/driving-the-mongo-heist-truck-from-fast-five.htmlhttps://www.youtube.com/watch?v=dZmi1AuLk4c

  • Ripsaw EV2 pickup body 3D Model

    Ripsaw EV2 pickup body 3D Model

    The Ripsaw is a developmental unmanned light tank designed and built by Howe & Howe Technologies for evaluation by the United States Army.The Ripsaw is intended to perform various missions including convoy protection, perimeter defense, surveillance, rescue, border patrol, crowd control, and explosive ordnance disposal.Ripsaw Extreme Vehicle 2 has been crafted into ‘one of the world’s most sought after high performance, luxury vehicles,’ according to makers Howe & Howe Technologies.Model dimensions:- length – 5500 mm- width – 2590 mm- height – 1952,5 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://www.howeandhowe.com/http://www.nocarnofun.com/meet-the-ultimate-in-extreme-luxury-ripsaw-ev2-super-tank-yeah-baby/http://www.ripsawtank.com/https://www.youtube.com/watch?v=PSbuD_SP9ushttps://www.youtube.com/watch?v=2cgvB7-XzVshttps://www.youtube.com/watch?v=9R1hcbNnkWc

  • Rover II 3D Model

    Rover II 3D Model

    Model dimensions:- length – 5206,14 mm- width – 5020 mm- height – 2341 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 1587,5 mm- width – 500 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 1180 mm- width – 420 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 1050 mm- width – 555 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 1040 mm- width – 450 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Offroad wheel 3D Model

    Offroad wheel 3D Model

    Model dimensions:- diameter – 870 mm- width – 350 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Twheel for Hammer H1 3D Model

    Twheel for Hammer H1 3D Model

    Non-Pneumatic military tireModel dimensions:- diameter – 939,8 mm- width – 260 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Ripsaw SSR1 3D Model

    Ripsaw SSR1 3D Model

    The Ripsaw is a developmental unmanned light tank designed and built by Howe & Howe Technologies for evaluation by the United States Army.The Ripsaw is intended to perform various missions including convoy protection, perimeter defense, surveillance, rescue, border patrol, crowd control, and explosive ordnance disposal.Ripsaw SSR (Super Sand Rail) series Ripsaws are the most extreme and most terrain dominant Ripsaws ever developed. Designed with 1500hp and an astonishing .2 hp/lbs power to weight ratio, with over 112 inches of track on the ground, the Ripsaw SSR stands as one of the world’s most exhilarating off-road vehicles ever conceived. Wheel speed is no longer necessary to traverse slopes of loose terrain such as mud, sand and snow.The model is a life-size and proportioning.Model dimensions:- length – 4442,5 mm (without antennas)- width – 2330 mm- height – 1743,8 mm (without antennas)Designed in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://www.youtube.com/watch?v=t4nxgs4DrZQhttps://www.youtube.com/watch?v=2cgvB7-XzVshttp://www.ripsawtank.com/ripsaw-wallpaper-high-res.htmlhttp://motonetworks.com/ripsaw-ssr1-1500hp-tank-performance-supercar-guarantee-youll-want-one/http://www.ripsawtank.com/ripsaw-ssr-series.html

  • Wheel from Argo 3D Model

    Wheel from Argo 3D Model

    Model dimensions:- diameter – 600 mm- width – 285 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Wheel from Pulling truck 3D Model

    Wheel from Pulling truck 3D Model

    Model dimensions:- diameter – 1000 mm- width – 520 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Pulling truck with Mattracks Suspension tracks 3D Model

    Pulling truck with Mattracks Suspension tracks 3D Model

    Model dimensions:- length – 6965 mm- width – 2764 mm- height – 2291 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Mud truck 2 3D Model

    Mud truck 2 3D Model

    Mud truck takes part in competition of Mud bogging (also known as mud racing, mud running, mud drags, or mudding), which is a form of off-road motorsport popular in Canada and the United States in which the goal is to drive a vehicle through a pit of mud or a track of a set length. Winners are determined by the distance traveled through the pit. However, if several vehicles are able to travel the entire length, the time taken to traverse the pit will determine the winner.Model dimensions:- length – 5348,5 mm- width – 2920 mm- height – 2955 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://www.youtube.com/watch?v=Y3RqGmI0tcUhttp://www.bustedknucklefilms.com/featured-rigs/head-rush-chevy-mud-truck/http://www.fourwheeler.com/features/1403-top-trucks-from-the-2014-st-lucie-mud-jam/photo-03.htmlhttps://www.youtube.com/watch?v=vmf1tqgi14chttps://www.youtube.com/watch?v=CM-PxdVw4rUhttps://www.youtube.com/watch?v=z69C3HdsoQIhttps://en.wikipedia.org/wiki/Mud_bogging

  • RV from Hell with Mattracks Suspension tracks 3D Model

    RV from Hell with Mattracks Suspension tracks 3D Model

    This vehicle is the Chevrolet 1989 “RV from Hell” from the action-comedy “Tango and Cash” with Sylvester Stallone and Kurt Russell.For experiment, I added to it Mattracks Suspension tracks.Model dimensions:- length – 5055,3 mm- width – 2760,4 mm- height – 2476,65 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://bangshift.com/bangshiftxl/movie-truck-freak-check-weird-custom-truck-used-movie-tango-cash/http://www.carstyling.ru/ru/entry/Tango_Cash_1989_RV_from_Hell/http://www.carstyling.ru/ru/entry/Tango_Cash_1989_RV_from_Hell/images/3704/https://en.wikipedia.org/wiki/Tango_%26_Cash

  • RV from Hell from Tango and Cash 3D Model

    RV from Hell from Tango and Cash 3D Model

    This vehicle is the Chevrolet 1989 “RV from Hell” from the action-comedy “Tango and Cash” with Sylvester Stallone and Kurt Russell.Model dimensions:- length – 5051,3 mm- width – 2590,1 mm- height – 2356,6 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://bangshift.com/bangshiftxl/movie-truck-freak-check-weird-custom-truck-used-movie-tango-cash/http://www.carstyling.ru/ru/entry/Tango_Cash_1989_RV_from_Hell/http://www.carstyling.ru/ru/entry/Tango_Cash_1989_RV_from_Hell/images/3704/https://en.wikipedia.org/wiki/Tango_%26_Cash

  • Track buggy 3D Model

    Track buggy 3D Model

    Model dimensions:- length – 7235 mm- width – 2810 mm- height – 3075 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Track from Ripsaw 3D Model

    Track from Ripsaw 3D Model

    Model dimensions:- length – 4780 mm- width – 510 mm- height – 1230 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Terrastar wheel system 3D Model

    Terrastar wheel system 3D Model

    Model dimensions:- diameter – 2385 mm- length – 2206,14 mm- width – 890 mm- height – 2051,25 mDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Low-pressure wheel 3D Model

    Low-pressure wheel 3D Model

    Model dimensions:- diameter – 1200 mm- width – 450 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Wheel from Mud truck 3D Model

    Wheel from Mud truck 3D Model

    Model dimensions:- diameter – 1564 mm- width – 600 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Safari Monster Truck 3D Model

    Safari Monster Truck 3D Model

    Model dimensions:- length – 8682,8 mm- width – 3540 mm- height – 3854 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://www.roadsideamerica.com/tip/29098https://www.youtube.com/watch?v=n2ZDafJfi8ohttps://www.youtube.com/watch?v=8SsXF6KyzCkhttps://www.youtube.com/watch?v=jxyhqSoh_a0

  • Monster truck Free 3D Model

    Monster truck Free 3D Model

    A monster truck is a vehicle that is typically styled after pickup truck bodies, modified or purposely built with extremely large wheels and suspension.They are used for competition and popular sports entertainment and in some cases they are featured alongside motocross races, mud bogging, tractor pulls and car-eating robots.Designed in SolidWorks 2012, rendered in KeyShot 4.

  • Mongo Heist Truck 3D Model

    Mongo Heist Truck 3D Model

    The truck known as “Mongo” from Fast Five, was built from scratch using an old Oshkosh HEMTT military cab the film crew was able to pickup at a Marine Corps surplus sale. The cab sits on a collection of steel tubing, which serves as its fundamental support and chassis. A cradle was built into the underside of the vehicle, from which all its suspension anchors to, including a set of box shocks. The engine of choice is a 502 cubic-inch, Chevrolet, Ram Jet, crate motor, offering upwards of 600 horsepower. Despite its 9,000 lb curb weight, the 7:10 final drive ensures it’s still fairly quick.Model dimensions without antenna:- length – 7535 mm- width – 2740 mm- height – 2765 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Information links:http://www.edmunds.com/car-reviews/features/driving-the-mongo-heist-truck-from-fast-five.htmlhttps://www.youtube.com/watch?v=dZmi1AuLk4c

  • Screw terrain vehicle ZIL-4904 3D Model

    Screw terrain vehicle ZIL-4904 3D Model

    A screw-propelled vehicle is a land or amphibious vehicle designed to cope with difficult snow and ice or mud and swamp. Such vehicles are distinguished by being moved by the rotation of one or more auger-like cylinders fitted with a helical flange that engages with the medium through or over which the vehicle is moving. Modern vehicles called Amphirols and other similar vehicles have specialised uses.The weight of the vehicle is typically borne by one or more pairs of large flanged cylinders; sometimes a single flanged cylinder is used with additional stabilising skis. These cylinders each have a helical spiral flange like the thread of a screw. On each matched pair of cylinders, one will have its flange running clockwise and the other counter-clockwise. The flange engages with the surface on which the vehicle rests. Ideally this should be slightly soft material such as snow, sand or mud so that the flange can get a good bite. An engine is used to counter-rotate the cylinders—one cylinder turns clockwise and the other counter-clockwise. The counter-rotations cancel out so that the vehicle moves forwards (or backwards) along the axis of rotation.The principle of the operation is the inverse of the screw conveyor. A screw conveyor uses a helical screw to move semi-solid materials horizontally or at a slight incline; in a screw propelled vehicle, the semi-solid substrate remains stationary and the machine itself moves.Model dimensions:- length – 8575 mm- width – 3585 mm- height – 2932,5 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://en.wikipedia.org/wiki/Screw-propelled_vehiclehttps://www.youtube.com/watch?v=_Z2AL34xpw0https://www.youtube.com/watch?v=lREoieCq_Cohttps://www.youtube.com/watch?v=HB_a5R6QjWE

  • Big Foot from Mad Max Fury Road 3D Model

    Big Foot from Mad Max Fury Road 3D Model

    Bigfoot, the apocalyptic monster truck, features key upgrades like harpoon, machine gun on a 1940’s Fargo pickup body, with a supercharged 600 CID V8, 66″ Terra tires & 4 feet of suspension travel.Model dimensions:- length – 5831,5 mm- width – 3990 mm- height – 3666 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://screenrant.com/mad-max-fury-road-vehicles-guide/http://www.bloomberg.com/news/articles/2015-05-12/every-killer-car-in-mad-max-fury-road-explainedhttps://www.youtube.com/watch?v=Zgkawcew2u8http://elementemagazine.com/mad-max-fury-road-lease-gallery/

  • Rubber track chassis 3D Model

    Rubber track chassis 3D Model

    Model dimensions:- length – 4720 mm- width – 2552 mm- height – 1125,7 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Bigfoot 5 Largest Monster Truck 3D Model

    Bigfoot 5 Largest Monster Truck 3D Model

    Bigfoot 5 is a monster truck based out of St. Louis, Missouri built in 1986 to be the world’s tallest monster truck. The truck, notably, sits on 10 foot tall Tundra tires (in contrast to the the long time 66 inch tall monster truck tire standard), Due to it’s unnatural height, this truck has never actually competed in public, but has crushed cars on certain occasions. In addition to height, Bigfoot 5 is also the heaviest truck ever built, at 28,000lbs.Model dimensions:- length – 6588 mm- width – 4114 mm- height – 4650 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://www.youtube.com/watch?v=TufF4VwzqAshttps://www.youtube.com/watch?v=jdz3HceLGv0https://www.youtube.com/watch?v=NTBg4s4blVkhttps://www.youtube.com/watch?v=yZr06VOJpNAhttps://www.youtube.com/watch?v=bHtBtpaX5hUhttp://bigfoot4x4.com/blog/bigfoot-5/http://monstertruck.wikia.com/wiki/Bigfoot_5https://en.wikipedia.org/wiki/Bigfoot_(truck)

  • Ripsaw MS1 UGV 3D Model

    Ripsaw MS1 UGV 3D Model

    The Ripsaw is a light tank designed and built by Howe & Howe Technologies.The Howe brothers started the Ripsaw as a small family project in 2000. They introduced it at a Dallas vehicle show in 2001, where it caught the interest of the U.S. Army.Ripsaw MS1 is an unmanned ground vehicle that is designed to be easily fixed and replaced.The light tank is controlled from a modular station that can be fitted in other army vehicles located out of the battlefield.Model dimensions:- length – 5090 mm- width – 2290 mm- height – 2300 mmDesigned in Solid Works 2012, rendered in Keyshot 4.1.35.

  • Polar rover 3D Model

    Polar rover 3D Model

    Great White Bear Tours uses special vehicles named Polar rovers, which were built for both rough terrain travel and passenger comfort.They are designed and constructed in Winnipeg, Manitoba, Canada by Don Walkoski.Model dimensions:- length – 14493 mm- width – 4070 mm- height – 3782 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://www.youtube.com/watch?v=ZITOEPlDVnEhttps://www.youtube.com/watch?v=I3jv7lETmkAhttps://www.greatwhitebeartours.com/about/polar-rovers

  • Mud truck 3D Model

    Mud truck 3D Model

    Mud truck takes part in competition of Mud bogging (also known as mud racing, mud running, mud drags, or mudding), which is a form of off-road motorsport popular in Canada and the United States in which the goal is to drive a vehicle through a pit of mud or a track of a set length. Winners are determined by the distance traveled through the pit. However, if several vehicles are able to travel the entire length, the time taken to traverse the pit will determine the winner.Model dimensions:- length – 5895 mm- width – 2920 mm- height – 3268 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://www.youtube.com/watch?v=Y3RqGmI0tcUhttp://www.bustedknucklefilms.com/featured-rigs/head-rush-chevy-mud-truck/http://www.fourwheeler.com/features/1403-top-trucks-from-the-2014-st-lucie-mud-jam/photo-03.htmlhttps://www.youtube.com/watch?v=vmf1tqgi14chttps://www.youtube.com/watch?v=CM-PxdVw4rUhttps://www.youtube.com/watch?v=z69C3HdsoQIhttps://en.wikipedia.org/wiki/Mud_bogging

  • Rock crawling buggy 3D Model

    Rock crawling buggy 3D Model

    Rock crawling is an extreme form of off road driving using vehicles anywhere from stock to highly modified to overcome obstacles. In rock crawling, drivers drive highly modified four-wheel-drive vehicles such as trucks, Jeeps, and “buggies” over very harsh terrain. Driving locations include boulders, mountain foothills, rock piles, mountain trails, etc.Rock crawling is about slow-speed, careful and precise driving, and high torque generated through large gear reductions in the vehicles drivetrain. Rock crawlers often drive up, down and across obstacles that would appear impassable. Such vehicles to rock climb are primarily 4x4s.Model dimensions:- length – 4421 mm- width – 2514 mm- height – 1750 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Chassis for Mud truck 3D Model

    Chassis for Mud truck 3D Model

    Model dimensions:- length – 5104 mm- width – 2920 mm- height – 2002 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Chassis for vehicle with Mattracks Suspension tracks 3D Model

    Chassis for vehicle with Mattracks Suspension tracks 3D Model

    Model dimensions:- length – 4429 mm- width – 2612 mm- height – 1384 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Chassis for Monster vehicle 3D Model

    Chassis for Monster vehicle 3D Model

    Model dimensions:- length – 5562,82 mm- width – 3540 mm- height – 2002 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Chassis 8×8 3D Model

    Chassis 8×8 3D Model

    Model dimensions:- length – 9504 mm- width – 2920 mm- height – 2002 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Chassis for Bigfoot 5 Largest Monster Truck 3D Model

    Chassis for Bigfoot 5 Largest Monster Truck 3D Model

    Bigfoot 5 is a Ford monster truck based out of St. Louis, Missouri built in 1986 to be the world’s tallest monster truck. The truck, notably, sits on 10 foot tall Tundra tires (in contrast to the the long time 66 inch tall monster truck tire standard), Due to it’s unnatural height, this truck has never actually competed in public, but has crushed cars on certain occasions.Model dimensions:- length – 6588 mm- width – 6282 mm- height – 3224 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Formula Off Road 3D Model

    Formula Off Road 3D Model

    Formula Off Road is a form of off-road racing 4×4 motorsport. It was invented in Iceland. In the hopes of bringing in more money for Icelandic rescue teams, the teams started to show their 4WD cars in action in the Icelandic hills. It soon became more of a competition between the teams, and soon the teams were building specially made vehicles for just this purpose.Formula Off Road takes place in closed areas with no road traffic. Rock mines, for example, which are usually just outside towns, are often used because they offer the right kind of terrain. Mostly the surface is driven just as it is but occasionally it is modified slightly for spectator experience. The tracks themselves are makeshift, marked by old tires, flags or sticks. On the day of the event the course marshal takes the drivers through the tracks on foot and explains how they are laid out and how they are supposed to be driven.The Formula Off Road usually has the following modifications:- Locked front and rear differentials as well as the centre transfer case. When one tyre is turning they all are.- Gear ratios are lowered and usually have slightly higher ratios up front. This makes the front wheels turn a little faster and makes the vehicle easier to steer in the extreme situations.- Engines are eight-cylinder petrol engines. A nitrous system gives an extra couple of hundred bhp when the pedal is floored.- Sand drag tyres for maximum traction. The Unlimited Class allows the use of paddle tyres that are built on racing slicks with the paddles welded on. The Modified Street Class uses die-cast sand drag tyres with slightly smaller shovels.- Suspension is made to accommodate fast changing surfaces. The older trucks have coil springs while newer trucks have air springs that are easier to adjust according to each track. A new type of suspension is also being tested by at least one contestant. It’s similar to your typical motorcycle, where the shock absorber and the suspension arm is built into a single unit.- A specially built roll cage is required for all vehicles.- Steering is hydraulic and not allowed on the street.Model dimensions:- length – 4430 mm- width – 2796 mm- height – 1641 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Landmaster from Damnation Alley 3D Model

    Landmaster from Damnation Alley 3D Model

    The Landmaster is a unique 12-wheeled amphibious articulated vehicle constructed by Dean Jeffries at Jeffries Automotive in Universal City, California for the 1977 science fiction film Damnation Alley.Model dimensions:- length – 11078 mm- width – 3670,27 mm- height – 3924,31 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:https://en.wikipedia.org/wiki/Landmasterhttps://www.youtube.com/watch?v=26n3RsXNyKEhttps://www.youtube.com/watch?v=ZZYT2nYd46ohttps://www.youtube.com/watch?v=cPuuMk4I06M

  • Truck with Mattracks Suspension tracks 3D Model

    Truck with Mattracks Suspension tracks 3D Model

    Model dimensions:- length – 7535 mm- width – 2884 mm- height – 2770 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Dodge Charger with Mattracks Suspension tracks 3D Model

    Dodge Charger with Mattracks Suspension tracks 3D Model

    Model dimensions:- length – 5348,5 mm- width – 2612 mm- height – 1755 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.

  • Megaforce bike 3D Model

    Megaforce bike 3D Model

    Model of bike from movie “Megaforce” 1982.Model dimensions:- length – 2115,6 mm- width – 967,9 mm- height – 1631,2 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://www.imdb.com/title/tt0084316/https://en.wikipedia.org/wiki/Megaforcehttps://www.youtube.com/watch?v=oaa8I7gbYqQhttps://www.youtube.com/watch?v=dqCb_9ubQ1U&t=218s

  • MiniRip 3D Model

    MiniRip 3D Model

    The MiniRip is an all-terrain vehicle (ATV) from 2010 built by Maine-based extreme vehicle fabricators Howe and Howe that features large tank treads capable of traveling over hills, snow, streams, and various other obstacles.The model is a life-size and proportioning.Model dimensions:- length – 2315 mm- width – 1250 mm- height – 1111,7 mmDesigned in Solid Works 2012, rendered in Keyshot 5.0.99.Useful links:http://www.howeandhowe.com/https://www.youtube.com/watch?v=XKgi2g-uUBIhttp://wheelsaddicts.com/baddest-atv-ever-terrain-mini-ripsaw/http://kangaroo.ae/uae/exclusive/117-mini-ripsaw.htmlhttp://www.discovery.com/tv-shows/other-shows/videos/howe-and-howe-tech-mini-rip-mud-ride/http://www.discovery.com/tv-shows/other-shows/videos/howe-and-howe-tech-mini-rips-big-day/https://overpowerd.com/machines/the-mini-ripsaw-from-howe-howe-technologies-brings-military-all-terrain-vehicle-to-the-civilian-sector/