3DHunt.co

Tag: add

  • Add light for Delta / Kossel 3D printer 3D Print Model

    Add light for Delta / Kossel 3D printer 3D Print Model

    Summary

    I decided to add LED for my Kossel 3d printer (My model is Anycubic Kossel Linear Plus) to make it easier for me to check if I need to print overnight.
    Material:
    6x LED stripes (12VDC, width: 1cm, length: 15cm each)
    M3x10mm bolts and M3 T-nuts
    Wires
    Printed parts:
    6x Part01
    6x Part02
    6x Part02_Mirror
    I already show to you guys how to make it step by step in each picture. Just follow them and you can make it.
    Here are all those steps:
    Step 01: Using 12V LED stripe (1cm in width) and cut to 6 pieces (15cm each)
    Step 02: Soldering all 6 LED stripes.
    Step 03: Wire out all LED stripes.
    Step 04: Make a small board to attach all LED stripes, 12VDC power supply and ON/OFF switch
    Step 05: Connect and test all LED stripes.
    Step 06: Using a piece of thick tape to cover all circuit board.
    Step 07: Using M3 bolts and M3 T-nuts for the board.
    Step 08: Attach the board to the frame (below the heated bed)
    Step 09: Print 6xPart01, 6xPart02 and 6xPart02_Mirror to make 6 LED stripes holder.
    Step 10: Using super glue to attach LED stripe into LED stripe holder (Part01). Remember to attach the Part02 and Part02_Mirror to Part02 before doing this step.
    Step 11: Attach all LED stripes to 3d printer frame with M3 T-Nuts.
    Step 12: Remove the heated bed and connect all LED stripes to the small board we’ve made before. For the 12VDC input, you can use directly from 3d printer power supply.
    Step 13: For the ON/OFF switch, you can place it in front.
    DONE!!!
    Print Settings
    Printer:
    Anycubic Kossel Linear Plus
    Rafts:
    No
    Supports:
    No
    Resolution:
    0.2mm
    Infill:
    20%

    How I Designed This

  • Xiaomi m365 Clamp (scooter Frame Mounting) to add a box or bag – Plateau et Collier de serrage pour rajout de boite ou sac 3D Print Model

    Xiaomi m365 Clamp (scooter Frame Mounting) to add a box or bag – Plateau et Collier de serrage pour rajout de boite ou sac 3D Print Model

    Summary
    Participant à un groupe Telegram d’entraide/optimisation de la trottinette Xiaomi m365, j’ai modélisé ce plateau équipé de colliers de serrage s’intégrant sur le cadre entre la fourche avant et le deck pour rajouter une boite ou un sac rigide en les pinçant avec les éléments intérieurs,
    A assembler avec des vis M5 x 60 à 70 (suivant l’épaisseur de votre boite) à tête cylindrique hexagonale et boulons associés
    N’hésitez pas à me faire vos retours pour d’éventuelles améliorations, adaptations nécessaires…

  • Cadafl F1 3D Model

    Cadafl F1 3D Model

    cadafl F1my mail : aleck.sawkin2016@gmail.comATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!

  • House gnome 3D Model

    House gnome 3D Model

    The house gnomemy mail : aleck.sawkin2016@gmail.comATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!

  • Frog cuckoo 3D Model

    Frog cuckoo 3D Model

    my mail : aleck.sawkin2016@gmail.comATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!

  • Winter mountains 3D Model

    Winter mountains 3D Model

    my mail : aleck.sawkin2016@gmail.comATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!ATTENTION WRITE WHAT 3D MODELS ADD TO SALE !!!!!!!!!!!!!!!!!!!!!!!!

  • Gelatinous cube 3D Model

    Gelatinous cube 3D Model

    Gelatinous cube whit skeleton stuck ,rigged

  • Slime skeleton 3D Model

    Slime skeleton 3D Model

    Rigged (only torso) slime skeleton

  • Camera mic holder 3D Print Model

    Camera mic holder 3D Print Model

    It’s a microphone holder for DSLRs and other cameras. The microphone holder is attached via the HOT SHOE connector, which is usually located on the top.

  • Camera mic holder 3D Print Model

    Camera mic holder 3D Print Model

    It’s a microphone holder for DSLRs and other cameras. The microphone holder is attached via the HOT SHOE connector, which is usually located on the top.

  • Power Add battery bank phone holder 3D Print Model

    Power Add battery bank phone holder 3D Print Model

    Summary
    My Nexus 6p’s battery seems to not last long enough for my Netflix watching while in bed. Generally I will use my PowerAdd battery bank to combat this issue without being tethered to a wall, but it became a problem as I didn’t want to hold the phone let alone the phone and the battery. This model when printed as a pair clips onto the battery to hold the phone.
    It will likely work on other phone models as is a centimeter of clearance on the stand to account for my phone’s case.
    Enjoy!
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    No Supports:
    No Resolution:
    .25 Infill:
    30% Notes:
    This model would likely work at a lower infill, I chose 30% to ensure that it would be plenty strong enough for my phone.

  • hermit crab shell 3D Model

    hermit crab shell 3D Model

    with your creativity, you can add more details in the shell to give a hermit crab a better home

  • Turbine

    Turbine

    Cinema4d R17 model for Corona render A6+ tex.zip (25 textures), + FBX +3DS+OBJ.Low-poly models for gaming and motion

  • Nuclear installation

    Nuclear installation

    Cinema4d models + FBX+ OBJ+ 3ds.Low-Poly models and Corona Render Materials.For Games and motion.