3D Model of GERMAN FLAK 36 88MMFiles in Winrar Archives.Native format is Autodesk Maya 2008The model is GroupedLocated in Scene XYZ=0,0,0.:::Formats:::..obj / Located in Scene in XYZ=0,0,0.fbx 2006 / Located in Scene in XYZ=0,0,0.mb Maya 2008 and up / Located in Scene in XYZ=0,0,0.max 3ds max 2015 / Located in Scene in XYZ=0,0,0.:::Materials::::.-4 materials.:::Textures::::.Hand painted textures.Base, cannon, controls, shield.X3 – 8192×8192 / .jpgX1- 4096×4096 / .jpg-Color-Normal map-BumpEnjoy!!!
Tag: 8mm
-
8mm rod endstop switch mount 3D Print Model
Summary
Adjustable endstop switch mount for an 8mm rod. Used on my knock-off Prusa i3 -
Flexible Shaft Coupler 5mm to 8mm 3D Print Model
Summary
Flexible Shaft Coupler – for 5mm Shaft with flat to 8mm Shaft. Print the coupler end pieces from PLA or ABS, the flexible insert with NinjaFlex/TPU, etc. Designed for 4mm screws and nuts to clamp to the shafts.
Print Settings
Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2mm Infill:
40-80% for shaft clamps, 35% for flexible insert -
Prusa Steel X axis with tensioner and 8mm leadscrew support 3D Print Model
Summary
This X axis for the Prusa steel frame features a convenient single screw belt tensioner and supports 8mm leadscrews.
You need some M3 screws and nuts to mount the leadscrew nuts in place, a M4 screw and nut for the tensioner and a M5 screw and nut for the toothed idler, I use a cheap aliexpress toothed idler with a M5 bore.
Prints without supports.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Steel Rafts:
Doesn’t Matter Supports:
No Resolution:
0.3-0.25 Infill:
25-30% -
PTFE Holder for 8mm Screw Bar 3D Print Model
Summary
I make this thing for guide the ptfe tube for my extruder.
Print Settings
Printer Brand:
PrintrBot Printer:
Play Rafts:
No Supports:
No Resolution:
0.2 Infill:
15% -
FTC 15 Tooth Sprocket 8mm Pitch for Revrobotics Chain fit to Tetrix Hub 3D Print Model
Summary
FTC 15 Tooth Sprocket 8mm Pitch for Revrobotics Chain fit to Tetrix Hub. This part is so that you can use RevRobotics chain with a Tetrix standard kit. -
Fijación eje 8mm 3DE 3D Print Model
Summary
Soporte para eje 8 mm
Post-Printing
Soporte
Soporte
How I Designed This
Soporte
SoporteCustom Section
soporte
soporte -
Dial_Backing – Dial Backing for UM1 with 8mm shafts 3D Print Model
Summary
UM1 has 8mm shafts rather than 6mm that UM2/3 uses.
I have re-engineering the part with wider slots and added an offset mould for whom have a longer extruder. -
Raspberry Pi Camera 1.3 holder for Anet A8 (or any 3D printer with 8mm frame)
Summary
Simple one piece holder for Raspberry Pi Camera 1.3, i made this for the Anet A8 but as long your 3Dprinter frame is 8mm and you have clearance, it should be compatible.
Can be printed without supports.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
0.2 Infill:
10-20%
