The “unconventional” spinner series continues. This time I was inspired by the rudder of the old galleons, which we have seen many times in pirate films.
To reduce the thickness, I used eight 6MA nuts, 10 mm. hexagon, and the bearing is, as usual, the standard skateboard 608, 22 mm in diameter. As always, it is not necessary any glue to hold everything together.
I downloaded two versions: one called “SailorSpinner_body”, which is much more like a rudder, but needs supports, a bit of post print jobs, and a pretty accurate printer; and a “SailorSpinner_body_easy” that does not need supports and It prints easily.
The lids and the bearing caps are suitable for both models.
Tag: 608_bearing
-
Sailor spinner 3D Print Model
-
Triangle spinner
Three triangle spinners.
In stl for bearing 608, holes 22.1mm
Besides in openscad (or in customizer) you can set any bearing, thickness and smoothness.
in function bearingDimensions(model) given dimensions for 29 various bearings.
You only need to specify a model (606,607,608,609,623,624,625,626,627,628,629,683,688,689,697,6000,6001,6003,6005,6801,6804,6805,6901,6902,6903,6904,6905,6906,6908).
model#1 printing without support.
model #2 and #3 needs support and a lot of sanding.
