Summary
I used this things – https://www.thingiverse.com/thing:2429022 to modified for the 40mm fan since it look like having the best design for the fan shrouds
Tag: 40mm
-
40mm fan shrouds 3D Print Model
-
BBQ 97mm to 40mm Blower Server Fan Duct press fit 1012 KH302 3D Print Model
Summary
this should also fit ANY fan with a output size of ~58mm x ~33mm
i designed this blower duct to attach to a Delta KH302 BFB1012EH blower fan, to use for stoking a fire pit which had a 50mm pipe put through it with air holes. to allow the middle of the fire to suck in air from outside
the outside of the top circle is 40mm and 33mm between the two flat sides.
it is a press fit onto the output of the fan.
thickness of the walls is about 2mm, however it does get quite thin in a couple of spots where the fan presses in.
Haribo Prusa i3 mk2
printed at 60mm/s
0.2mm layers
ABS @ 245C with a 40% fan in a enclosure which reaches about 50C
supports are required for the lip where the fan pushes in until.
this lip is about the same thickness as the fan case, so has a nice smooth airflow.
yet to test this on the fire pit, hoping that a 12v 3amp fan, moving a lot of air through the plastic will keep it cool enough to not melt. (thus why the walls are only 2mm thick)
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20% -
Round lip model base paint clamp 30mm 40mm 50mm 3D Print Model
Summary
Simple clamps for round lipped 30mm 40mm and 50mm model bases. Insert printed clamp into a 1/2″ pvc pipe coupler.
Print Settings
Printer:
i3 clone
Rafts:
No
Supports:
Doesn’t Matter
Resolution:
.3 -
HyperCube Cube 40mm fan grill 3D Print Model
Summary
Replaced text with HyperCube logo.
Used on the fan for my Duet-Wifi, but should work with any 40mm fan. -
Hot Wheel Track 180 deg Turn, 45 deg Bank, 40mm Drop 3D Print Model
Summary
(Debuted at #mrrf2018)
This 180 degree turn with a 45 degree bank and 40mm drop hot wheel track has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster.
Step and fusion 360 files are included if you want to modify the design. Very likely you will need to do some clean up in the mounting slots. I am working on a tongue version of this same part, please subscribe to my profile if you would like to know when I release that part.
Happy printing. -
40mm fan bltouch mount 3D Print Model
Summary
just added fan guards, and rounded the corners a little is all -
Headphone hook for 40mm pipe 3D Print Model
Summary
I use this by attaching it to IKEA’s ADILS.https://www.ikea.com/jp/ja/catalog/products/00353742/
This requires M3, 10 mm screws and nuts.
Print Settings
Printer:
Snapmaker
Rafts:
Yes
Supports:
Yes
Resolution:
0.15mm
Infill:
8% -
Minimalistic fan bracket / mount for 40mm fan on a nema 17 3D Print Model
Summary
I wanted to put a fan to a drive motor (nema 17), but do not have a lot of space for it, so I created this minimalistic fan bracket. Not ideal in any way, shape or form, but it does provide some cooling when there is little room for a fan.
Mount the bracket to a 40mm fan and glue the centre part with CA glue to the motor. Nothing more to it.
Print Settings
Printer:
Heavily modified mendelmax 2
Rafts:
No
Supports:
No
Resolution:
.250
Infill:
lots of it
Notes:
Print using a strong material and with lots of infill, since the arms are flimsy and need all the strength they can get. -
Jet Fan Grid 40mm 3D Print Model
Summary
Jet design grid for 40mm fan -
40mm Fan Grille 3D Print Model
Summary
Fan shroud for a 40mm fan. After destroying two fans I decided it was time to protect the third one. -
E3d 40mm Fan Mount 3D Print Model
Summary
First Fusion 360 model I feel comfortable sharing, not perfect, but works great for me. Time for me to start contributing.
Made to fit the real E3d V6 hotend found here:http://a.co/hnA3NVu
Highly suggest PETG or Nylon, I printed mine in PETG and it’s rock solid and has not loosened in over 20hrs of printing.
Material – PETG or Nylon
Support – No
Infill – 100%
You will need to flip it 180º on the build plate as it’s upside down and don’t know how to correct it after the model has been drawn. 🙂
Feel free to leave constructive feedback.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0.1 Infill:
100 -
Pipe 40mm insect blocker valve 3D Print Model
Summary
For pipe 40 mm
Print Settings
Printer Brand:
RepRap Printer:
RepRap Ord Bot Hadron Rafts:
No Supports:
No Resolution:
0,325 Infill:
15 Notes:
Slic3r => Print Settings => Advanced => Other => XY Size Compesation : -0.125
Post-Printing
Finishing
Drill with 2mm drill bit
Use wire 2mm to mount -
40mm fan cover for anet a8 3D Print Model
Summary
40mm fan cover designed to fit in place of the metal one on the anet a8 -
E3D V6 40mm Fan Mount 3D Print Model
Summary
My E3D clone fan was just to loud and I had the feeling that I got heat creep, so I wanted to get a bigger (40mm) and therefore quiter fan.
I liked the snapon design of this (https://www.thingiverse.com/thing:354723) and this (https://www.thingiverse.com/thing:2058949) but it was just to bulky and didn’t quite fit with the hotend and carriage.
I also liked this (https://www.thingiverse.com/thing:506958) design with the angled fan, but the snap on didn’t fit for me.
So I kind of took both ideas and combined them in one design.
WIP ideas:
The only issue I have is, that the air blows through the E3D just fine, but has no propper path to escape, so it might flow down to the printing area. If anybody has suggestions, put it in the comments and I might try it. -
3D Printed Wood Arm Joints using 30mm x 40mm wood v0.7.0 3D Print Model
Summary
Attention: This project is released under the General Public License version 3.
There is no warranty for any problems that occurred using this project.
GPL v3:https://github.com/silvershell/printed-wood-arm-joints/blob/master/LICENSE
3D Printed Wood Arm Joints using 30mm x 40mm wood.
Scad files of models are generated with scad-builder.js and scad-builder-proj.js.
.scad and others are here.
GitHub:https://github.com/silvershell/printed-wood-arm-joints/tree/v0.7.0
