3DHunt.co

Tag: 30mm

  • Round lip model base paint clamp 30mm 40mm 50mm 3D Print Model

    Round lip model base paint clamp 30mm 40mm 50mm 3D Print Model

    Summary
    Simple clamps for round lipped 30mm 40mm and 50mm model bases. Insert printed clamp into a 1/2″ pvc pipe coupler.
    Print Settings
    Printer:
    i3 clone
    Rafts:
    No
    Supports:
    Doesn’t Matter
    Resolution:
    .3

  • spare fuse holder 6 x 30mm 3D Print Model

    spare fuse holder 6 x 30mm 3D Print Model

    Summary
    Holds a spare 6x30mm fuse.
    Use zip ties to connect it to a lead and you have a spare fuse ready to use for your equipment.
    Print Settings
    Printer:
    aldi cocoon
    Rafts:
    No
    Supports:
    No
    Resolution:
    0.2mm
    Infill:
    80%

  • e3d v6 30mm layer fan 3D Print Model

    e3d v6 30mm layer fan 3D Print Model

    Summary
    30mm layer cooling fan for the E3d v6 hotend.
    Designed to fit the monoprice mini but could be used on any printer with the same style mount.
    Print Settings
    Printer:
    m200
    Rafts:
    No
    Supports:
    Yes
    Resolution:
    0.175
    Infill:
    30+
    Notes:
    You will need a m3x35mm Alan key head bolt and nut.
    only test fitted to this mount.https://www.thingiverse.com/thing:1621387

  • 30mm Calibration cube for SLA printers – Hollow 3D Print Model

    30mm Calibration cube for SLA printers – Hollow 3D Print Model

    Summary
    This is a hollow cube with drain holes to minimise suction. Stick it on some supports, print it and measure
    When I used this on my Moai with v1.15 firmware, using “m” as the relevant cube measurement, the formula to calculate what put in the relevant X or Y entry is:
    900*(30/m)
    I haven’t used it on my D7 yest, but I’m sure you can work out what formula you would need to use.

  • Under-Desk Hook for 30mm desktop 3D Print Model

    Under-Desk Hook for 30mm desktop 3D Print Model

    Summary
    A sturdy hook for hanging jackets, bags, purses, etc. underneath a desk with a 30mm thick top (which is pretty standard). The current size slides on and off the desk easily with a close fit. If you are looking for a perfect/tight fit on a 30mm thick desktop, scale the piece to 99% and you should have a snug fit.
    Feel free to remix this to fit your needs. I don’t care if you print some and sell them, just mention me in the design credits.
    Print Settings
    Printer Brand:
    FlashForge Printer:
    Creator Pro Rafts:
    No Supports:
    No Resolution:
    .2mm Infill:
    20% Notes:
    The curves on the design help to reduce the chance your corners will peel up while you are printing. Plus, they look better.

  • Monoprice Select Mini E3D 30mm single fan hotend and nozzle cooling 3D Print Model

    Monoprice Select Mini E3D 30mm single fan hotend and nozzle cooling 3D Print Model

    Summary
    I wanted to upgrade my MP select mini (V1) with an e3d hot end, but couldn’t find a holder for it that didn’t require an additional new fan. The closest I could find was Toolboxx’s upgrade for a single fan, but that still assumed I would be switching out the fan for a 40mm fan. So I did a simple remix.
    All the 3D printed parts you need are included. You will need 2 M3x15mm screws and M3 bolts.

  • 3D Printed Wood Arm Joints using 30mm x 40mm wood v0.7.0 3D Print Model

    3D Printed Wood Arm Joints using 30mm x 40mm wood v0.7.0 3D Print Model

    Summary
    Attention: This project is released under the General Public License version 3.
    There is no warranty for any problems that occurred using this project.
    GPL v3:https://github.com/silvershell/printed-wood-arm-joints/blob/master/LICENSE
    3D Printed Wood Arm Joints using 30mm x 40mm wood.
    Scad files of models are generated with scad-builder.js and scad-builder-proj.js.
    .scad and others are here.
    GitHub:https://github.com/silvershell/printed-wood-arm-joints/tree/v0.7.0