3DHunt.co

Tag: 3030

  • Duet Ethernet Wifi 3030 supports. 3D Print Model

    Duet Ethernet Wifi 3030 supports. 3D Print Model

    Summary
    Simple supports fo fix the Duet Ethernet or Wifi to a 3030 extrusion on my Hypercube Evolution.
    Print a Pair.
    NOT TESTED YET!
    Print Settings
    Printer:
    Hypercube Evolution
    Rafts:
    No
    Supports:
    No
    Resolution:
    0.2
    Infill:
    50% Rectilinear

  • Prusa MK3 3030 Extrusion Mounted Pi Camera 3D Print Model

    Prusa MK3 3030 Extrusion Mounted Pi Camera 3D Print Model

    Summary
    I liked the ball joint flexibility of MoonDoggy’s pi cam design but didn’t want to attach it to the x-axis. So I modded jltx’s hard feet design to attach a ball joint and modded the original camera case to allow the cable to come out from the bottom.
    To install first attach the base and bit to the extrusion securely as indicated on the hard feet design. This can be anywhere you like on the printer extrusions. Next insert the ball link into the base and twist it slightly, it should be a tight fit as I had to use pliers. The rest is the same instructions as the cam design. You can use the original camera back on the new camera front. I hid the cam ribbon cable under the printer for tidiness.

  • Support Gopro 3030 3D Print Model

    Support Gopro 3030 3D Print Model

    Summary
    Bonjour,
    Le même que l’original mais mesurant 32 mm de haut contre 37 à l’origine.
    cordialement

  • Staffa nema17 48 mm estruso 3030 3 3D Print Model

    Staffa nema17 48 mm estruso 3030 3 3D Print Model

    Summary
    Staffa nema 17 per estruso 3030
    Altro https://www.thingiverse.com/thing:2755114
    Altro https://www.thingiverse.com/thing:2755366

  • 3030 bowden motor mount 3D Print Model

    3030 bowden motor mount 3D Print Model

    Summary
    A remix of Thingiverse part 2565427 but for 3030 aluminum extrusion.
    Added bracing and additional mounting holes for M6 bolts.
    Print Settings
    Printer:
    Doesn’t matter Rafts:
    No Supports:
    No Resolution:
    whatever cranks your handle (I used .16) Infill:
    again, whatever floats your boat (I used 20%)

  • Customizable Plate Bracket for Aluminium Extrusion Profiles (Misumi 2020, 2040, 4040, …) 3D Print Model

    Customizable Plate Bracket for Aluminium Extrusion Profiles (Misumi 2020, 2040, 4040, …) 3D Print Model

    This is a customizable 3d model that allows you to create and print aluminum extrusion brackets for different types and sizes of extrusion profiles.

  • Prusa MK2 Haribo 3030 Y Belt Tensioner 3D Print Model

    Prusa MK2 Haribo 3030 Y Belt Tensioner 3D Print Model

    Summary
    Adjustable Y Belt Tensioner for the Prusa MK2 Haribo 3030 Edition, I am sure that it will work for other 3030 setups as well. It uses an M2 screw with an M3 square nut that comes with the Prusa kits.
    This is based on the original design on Github so I am not sure who to give credit to for the original design.
    I place custom supports in the space where the square nut will sit using S3D, not sure if you can print without supports it give it a try.
    Print Settings
    Printer:
    Prusa MK2 Rafts:
    No Supports:
    Yes Resolution:
    .20 – .30 Infill:
    20%