The mobile harbour crane Liebherr LHM 180 3d model for 3ds max.
Tag: 180
-
Hot Wheel Track 180 deg Turn, 45 deg Bank, 40mm Drop 3D Print Model
Summary
(Debuted at #mrrf2018)
This 180 degree turn with a 45 degree bank and 40mm drop hot wheel track has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster.
Step and fusion 360 files are included if you want to modify the design. Very likely you will need to do some clean up in the mounting slots. I am working on a tongue version of this same part, please subscribe to my profile if you would like to know when I release that part.
Happy printing. -
Mercedes A Class 3D Model
Mercedes A Class Aclass CDI 150 160 170 180 200 car vehicle transportation automobile auto civilian detailed interior door
-
Acer Aspire S7 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Aurora 3D Printed Drone 180 Racer 3D Print Model
Summary
180 FPV drone racing platform. Depending on the infill settings and printing materials used it will withstand crashes.
Recommended hardware needed:
4 x 4.5 inch props
motors between 2450kv to 2650kv and a 12N14P frame work
small 36mm x 36mm flight controller (tested with Dodo)
4 in one 36mm x 36mm electronic speed controller (tested with Favourite 20Ax4)
small 25mw VTX with fixed antena mount (tested with Foxeer TM25)
small FPV camera (tested with Foxeer Arrow V1)
VTX antena
40mm round aluminum standoffs used to secure the POD (5mm diameter)
steel screws to hold motors (6mm recommended thread length)
Printing recommendations:
POD should be printed with flexible filament, 70% infill and 1mm wall thickness.
Landing skids should be printed with flexible filament, 35% infill and 1mm wall thickness.
Bottom plate must be printed with a rigid filament such as ABS or PLA with the flat part towards the building plate. 35% to 70% infill (anything higher will be to heavy), 1mm to 2mm wall thickness and 3mm to 4mm bottom and top layers.
Setting low infill values will make the frame as light as it carbon fiber counterparts or maybe lighter. Unfortunately this will sacrifice strength. On the other hand setting higher values will make it stronger but heavier. With todays common 3d printed material such as ABS and PLA this frame will never be stronger than CNC carbon fiber parts. If you test the frame with better materials let me know how it goes. -
Jacob Table 180 3D Model
One purchase gives access to all file formats available. By default only .max file format is selected for download.
