3DHunt.co

Tag: 12V

  • 12V socket insert / cover /lid 3D Print Model

    12V socket insert / cover /lid 3D Print Model

    Summary
    Needed a cover for a 12V power / cigarette lighter socket in order to prevent dirt/dust or moisture getting into it. (Mounted on my tractor)
    Print Settings
    Printer:
    Prusa -3 clone
    Rafts:
    No
    Supports:
    Yes
    Resolution:
    0.2
    Infill:
    20
    Notes:
    Tried printing it without support first, but came out rather messy. Hence recommend using support for this one.

  • Mean Well 360W 12V Power Supply Cover with Fused Switch 3D Print Model

    Mean Well 360W 12V Power Supply Cover with Fused Switch 3D Print Model

    Summary
    This is a cover that snaps onto a MW-360-12 power supply, it has a hole for mounting a fused switch and socket module, and the back is open for easy access to wiring.
    My FLSun Kossel Mini (printer in pic) came with a no-name generic power supply and one of the first upgrades I made was to replace it with a Mean Well supply. There are numerous mounting options on Thingiverse, I used: “Customizable PSU bracket” (https://www.thingiverse.com/thing:1646026) by rmoro to mount it on the side.
    It has holes on the right side to fasten to power supply, but it didn’t line up exactly on mine, and the piece stays attached nicely enough from the ridges on the sides.
    Print Settings
    Printer Brand:
    Creality
    Printer:
    CR-10
    Rafts:
    No
    Supports:
    No
    Resolution:
    0.2 mm
    Infill:
    10% lines

  • Housing for KKmoon DC 12V 24V 4-20 mA Signal Generator 3D Print Model

    Housing for KKmoon DC 12V 24V 4-20 mA Signal Generator 3D Print Model

    Summary
    This is my first design. Its just a housing for the KKmoon DC 12V 24V 4-20 mA Signal generator.
    I didnt print it yet since im waiting for my printer to arrive. I might have to tweak it a little.
    Maybe someone owns that thing too and wants to use a housing aswell

  • 3D model BP-511 LI-ION BATTERY 2017 RAW

    3D model BP-511 LI-ION BATTERY 2017 RAW

    BP-511 LI-ION BATTERY 2017RAW EDITION3DSMAX 2014VRAY 2.5PARTS: [5]ASSEMBLIES: [1]*NOTE: RAW model are only wireframe model. No textures, materials, lighting, and rendering setup are included.